Cưa tay bahco ergo profi 325 lưỡi lưỡng kim 24tpi-580600

Mô tả ngắn: Thương hiệu: BAHCO, Xuất xứ thương hiệu: Đức, Chất liệu: Thép, Model: 580600, Kích thước (Dài x Rộng x Cao): 24/15/20 cm, Xuất xứ: Đức, Trọng lượng sả...
Cập nhật giá lần cuối: 11/03/2024 (18 ngày trước)
Giá sản phẩm: 1.770.000 ₫
Nơi bán khác:
  • Logo Shopee
  • Logo Lazada

Sản phẩm tương tự

Thông số sản phẩm

Thương hiệu BAHCO
Xuất xứ thương hiệu Đức
Chất liệu Thép
Model 580600
Kích thước (Dài x Rộng x Cao) 24/15/20 cm
Xuất xứ Đức
Trọng lượng sản phẩm 2

Thông tin sản phẩm

Version: The electric drive can be used to run the screw forward to the point where torque is applied. The screw is then tightened manually to the set torque. Setting and operation directly at the torque wrench. Quick reporting of the torque via ONE-KEY for generation of reports. LCD display with strong colours and quick response times. Feedback on status and display of relevant information. Warning signals can be optionally set as tactile (vibration), visual (LEDs and display) and acoustic or combinations of these. The early warning point can be entered individually. Up to 28,000 measured values can be saved on the torque wrench. With calibration reminders. After a certain number of duty cycles and elapsed time. Units of measure: Nm, ftlbs, inlbs, kgcm. Standard: Tested to DIN EN ISO 6789. Accuracy: Clockwise +/- 2%, anticlockwise +/- 3%. Supplied with: Supplied with 12 V / 2. 0 Ah Red Li-ion battery, C12C charger and sturdy plastic case. Note: See No. 073814ff and No. 073840 for suitable batteries and chargers. Recalibration is performed by the manufacturer. ----------- suitable battery - supplier / battery type / voltage Milwaukee type B 12 V Direction of tightening For right and left-hand tightening Torque measuring accuracy 2 %; 3 % App link OneKey Test certificate Manufacturers test certificate Calibration Price on request Overall length L 597 mm Torque range 16.9 Nm - 203.4 Nm Torque range 12.5 lbfft - 150 lbfft Torque range 150 lbfin - 1,800 lbfin Resolution 0.1 Nm Weight 2,600 g Square drive 1/2 inch Display digital Release signalling acoustic; haptisk; haptisk Trigger principle Vibration motor Power supply Rechargeable battery-powered Number of rechargeable batteries contained 1 Type of rechargeable battery Lithium-ion Battery capacity 2 Ah Nominal voltage 12 V Motor design Fuel No load speed 0 rpm - 100 rpm Measurement technology electronic Data can be recorded no Setting the trigger value digital, adjustable Feedback acoustic signal; udlsning; visning Reversible reading Nm; lbfin; lbfft; kgf-cm Measurement process Torque Adjustable trigger value adjustable Standard DIN EN ISO 6789 Type of product Torque Wrench

Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....

Từ khóa